Fluke T150 Electrical tester: the perfect voltage tester to make your job faster, and safer.
(item no. 4016977)
Key features
The best combination of safety, ease-of-use and fast answers available anywhere. This voltage tester is built to work the way you work.
- Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries
- CAT IV 600 V, CAT III 690 V safety rating
- Redesigned cable assembly for superb reliability on the job
- With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present
Other useful features
- Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability
- Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
- Backlit graduated scale and backlit indicators
- Built in electric torch for use in dark areas
- Resistance testing to 1999 ohms
- Audio on/off for testing in quiet areas
- Improved probe docking for secure storage
- Phase rotation indicator for 3-phase systems
- Display hold freezes reading on display until your can view it comfortably
- Single-pole phase test offers fast identification of live conductors
- Push-on probe tips, probe tip protector and storage accessory
- Tip protector serves as an extra hand when opening UK electrical safety outlets
- Low battery indicator
Fluke T150 Voltage and Continuity Tester with LCD readout and additional resistance measurement
Fluke Two-pole Voltage and Continuity Testers give you fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation. Resistance measurements up to 1999 Ω. Display hold. Enhanced ergonomic design is easy to use (even with gloves on) and offers quick, secure probe docking.
How do we test our new and improved Two-Pole Voltage and Continuity Testers?
Two-pole voltage and continuity testers measure voltage, but just as important is when a two-pole tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That’s what Fluke’s redesigned two-pole testers give you.
Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever.
Specifications: Fluke Two-pole Voltage and Continuity Testers
The complete family of Fluke Two-Pole Voltage and Continuity testers lets you choose the features, functions, and price/performance to fit your applications and preferences.
Fluke voltage and continuity tester selection guide
| Features | T150 | T130 | T110 | T90 |
|---|---|---|---|---|
| Backlit LED indicator | • | • | • | • |
| Backlit LCD digital display | LCD | LCD | ||
| Continuity test—visual results | • | • | • | • |
| Continuity test—audible results | • with on/off |
• with on/off |
• with on/off |
• |
| Vibratory indicator under load | • | • | • | |
| Display hold | • | • | ||
| Voltage test | • | • | • | • |
| Indication of polarity | • | • | • | |
| Resistance measurement | • | |||
| Switchable load | • | • | • | |
| Single pole test for phase detection | • | • | • | • |
| Rotary field indicator | • | • | • | |
| Probe tip protection | • | • | • | • |
| Voltage detection with discharged batteries | • | • | • | • |
| Electrical torch function | • | • | • | |
| Wear indicator test lead wire | • | • | • | • |
Product specifications
| Specifications | T90 | T110 | T130 | T150 |
|---|---|---|---|---|
| Voltage AC/DC | 12V - 690V | 12V - 690V | 6V - 690V | 6V - 690V |
| Continuity | 0 - 400 kΩ | 0 - 400 kΩ | 0 - 400 kΩ | 0 - 400 kΩ |
| Frequency | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz |
| Phase rotation | - | 100 V - 690 V | 100 V - 690 V | 100 V - 690 V |
| Resistance measurement | - | - | - | Up to 1999 Ω |
| Response Time (LED indicator) | < 0.5 s | < 0.5 s | < 0.5 s | < 0.5 s |
| 200 kΩ input impedance | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
| 7k Ω input impedance (with load buttons pressed) | - | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V |
| Safety rating | CAT II 690V CAT III 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
| IP rating | IP54 | IP64 | IP64 | IP64 |
| Power requirement | 2-AAA batteries | 2-AAA batteries | 2-AAA batteries | 2-AAA batteries |
| Net weight | 280 g (9.9 oz) | 280 g (9.9 oz) | 280 g (9.9 oz) | 180 g (6.4 oz) |
| Size (LxWxH) | 26 cm x 7 cm x 3.8 cm | 26 cm x 7 cm x 3.8 cm | 26 cm x 7 cm x 3.8 cm | 23 cm x 6.5 cm x 3.8 cm |
| Warranty | 2 years | 2 years | 2 years | 2 years |
| Country of origin | Great Britain | Great Britain | Great Britain | Great Britain |
Manuals
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
Fluke T150 Electrical tester: the perfect voltage tester to make your job faster, and safer.
(item no. 4016977)
Key features
The best combination of safety, ease-of-use and fast answers available anywhere. This voltage tester is built to work the way you work.
- Designed according to IEC EN 61243-3:2014 to verify the absence of voltage – even with discharged batteries
- CAT IV 600 V, CAT III 690 V safety rating
- Redesigned cable assembly for superb reliability on the job
- With 4 ways to indicate the presence of voltage – LED indicator, LCD display, audible tone or tactile feedback, always know if hazardous voltage is present
Other useful features
- Dual insulated cable tested to 3x the required bend angle provides increased reliability and durability
- Switchable load: avoid display of ghost voltages allowing you to draw more current from the circuit under test and avoid trip residual-current devices (RCDs)
- Backlit graduated scale and backlit indicators
- Built in electric torch for use in dark areas
- Resistance testing to 1999 ohms
- Audio on/off for testing in quiet areas
- Improved probe docking for secure storage
- Phase rotation indicator for 3-phase systems
- Display hold freezes reading on display until your can view it comfortably
- Single-pole phase test offers fast identification of live conductors
- Push-on probe tips, probe tip protector and storage accessory
- Tip protector serves as an extra hand when opening UK electrical safety outlets
- Low battery indicator
Fluke T150 Voltage and Continuity Tester with LCD readout and additional resistance measurement
Fluke Two-pole Voltage and Continuity Testers give you fast test results the way you need them, with large, easy-to-use buttons, bright backlights, and clear audible and physical indicators designed for any work situation. Resistance measurements up to 1999 Ω. Display hold. Enhanced ergonomic design is easy to use (even with gloves on) and offers quick, secure probe docking.
How do we test our new and improved Two-Pole Voltage and Continuity Testers?
Two-pole voltage and continuity testers measure voltage, but just as important is when a two-pole tester tells you that there is NOT voltage present before working on any circuit. For you to rely on your two-pole tester, it has to be the most rugged and reliable tester you can find. That’s what Fluke’s redesigned two-pole testers give you.
Fluke knows the cable assembly is often where failures occur. The cable on any Two-Pole voltage and continuity tester is its weakest point- it is repeatedly bent, twisted, wrapped and put under constant strain. If the cable were to break, it could place you at an increased safety risk. Industry standards call for the cable to be tested to withstand a forty-five-degree bend, and still work after 5000 bend cycles. Fluke puts our testers through three times what the standard demands, flexing the cable over 150 degrees in each direction. This is why we can offer you our strongest voltage and continuity testers warranty ever.
Specifications: Fluke Two-pole Voltage and Continuity Testers
The complete family of Fluke Two-Pole Voltage and Continuity testers lets you choose the features, functions, and price/performance to fit your applications and preferences.
Fluke voltage and continuity tester selection guide
| Features | T150 | T130 | T110 | T90 |
|---|---|---|---|---|
| Backlit LED indicator | • | • | • | • |
| Backlit LCD digital display | LCD | LCD | ||
| Continuity test—visual results | • | • | • | • |
| Continuity test—audible results | • with on/off |
• with on/off |
• with on/off |
• |
| Vibratory indicator under load | • | • | • | |
| Display hold | • | • | ||
| Voltage test | • | • | • | • |
| Indication of polarity | • | • | • | |
| Resistance measurement | • | |||
| Switchable load | • | • | • | |
| Single pole test for phase detection | • | • | • | • |
| Rotary field indicator | • | • | • | |
| Probe tip protection | • | • | • | • |
| Voltage detection with discharged batteries | • | • | • | • |
| Electrical torch function | • | • | • | |
| Wear indicator test lead wire | • | • | • | • |
Product specifications
| Specifications | T90 | T110 | T130 | T150 |
|---|---|---|---|---|
| Voltage AC/DC | 12V - 690V | 12V - 690V | 6V - 690V | 6V - 690V |
| Continuity | 0 - 400 kΩ | 0 - 400 kΩ | 0 - 400 kΩ | 0 - 400 kΩ |
| Frequency | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz | 0 / 40 - 400 Hz |
| Phase rotation | - | 100 V - 690 V | 100 V - 690 V | 100 V - 690 V |
| Resistance measurement | - | - | - | Up to 1999 Ω |
| Response Time (LED indicator) | < 0.5 s | < 0.5 s | < 0.5 s | < 0.5 s |
| 200 kΩ input impedance | Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
Current draw 3,5 mA @ 690 V Current draw 1,15 mA @ 230 V |
| 7k Ω input impedance (with load buttons pressed) | - | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V | Current draw 30 mA @ 230 V |
| Safety rating | CAT II 690V CAT III 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
CAT III 690V CAT IV 600V |
| IP rating | IP54 | IP64 | IP64 | IP64 |
| Power requirement | 2-AAA batteries | 2-AAA batteries | 2-AAA batteries | 2-AAA batteries |
| Net weight | 280 g (9.9 oz) | 280 g (9.9 oz) | 280 g (9.9 oz) | 180 g (6.4 oz) |
| Size (LxWxH) | 26 cm x 7 cm x 3.8 cm | 26 cm x 7 cm x 3.8 cm | 26 cm x 7 cm x 3.8 cm | 23 cm x 6.5 cm x 3.8 cm |
| Warranty | 2 years | 2 years | 2 years | 2 years |
| Country of origin | Great Britain | Great Britain | Great Britain | Great Britain |
Manuals
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
Related Products
