Menu
Cart

News

DISTO for the Architect

Posted by Stephen Ferguson at

Since 1999, the architecture office of Rainer Dietz has renovated and modernised many apartment buildings of the fifities with over 230 flats. All apartments, stairwells, cellars and attics, as well as the facades, are newly measured and all measurements and material details are written down on the existing old plan on the spot. Later in the office, the data is entered into a CAD program and the current stock plans are prepared in the office. Challenge Most of the time, the plans we get are not actual. We have to remeasure all flats in a little while. So a time...

Read more →

Underground Alignment Lasers

Posted by Stephen Ferguson at

For safe and accurate measurements in the alignment of drill and blast mark-ups in underground mines, GEO-Laser have produced the TL-80 Laser. The TL-80 emits a laser beam as reference axis. It has a horizontal and a vertical rotation axis system with clamp and fine adjustment knob for quick and exact fine adjustment. The tunnelling laser can be used on its own or in combination with a traversing system. In this case it is advantegeous to adjust the trunnion axis height to the surveying instrument that is to be used (Wild or Leica) Boasting a 500m range in a <5mW laser, the optics...

Read more →

GEO-Laser's new green Pipe Laser

Posted by Stephen Ferguson at

Announcing the NEW GEO-Laser KL-90L and KL-91L pipe laser… with green diode technology.

Ever since the introduction of GEO’s first pipe laser, the TL-7, in 1973, their lasers have been a fixture on construction sites around the world. 

Read more →

Z-Laser's solution for inspection of PCB and micro parts.

Posted by Stephen Ferguson at

To demonstrate the functionality of electronic components, the correct position must be guaranteed for the assembly of components for PCBs. Lasers are used for this purpose with very narrow lines and a homogeneous intensity distribution. The laser triangulation determines whether all of the required components were located and installed in the required positions. Various errors can occur during the assembly process of a PCB, which affects the performance of the final product. Missing components (e. g. SMDs, THTs) Incorrect positioning of parts (twisted and/or shifted) Missing or defective solder joints Faulty coplanarity of ICs The implementation of laser triangulation permits...

Read more →

geo-Fennel Total Station FGS 1

Posted by Stephen Ferguson at

Unique GPS Set for multipurpose applications. The geo-FENNEL FGS 1 is a robust receiver designed for challenging environments integrated into a compact device that is lightweight and highly portable. The FGS 1 can track all current working GNSS constellations. By using a unique algorithm it can operate in RTK mode combining all GNSS constellation signals or by using a single GNSS constellation signal such as GLONASS or BeiDou. The strong anti-interference ability of the receiver makes it possible to work in any environment. The FGS 1 integrates a cutting edge GNSS board, Bluetooth®, optional UHF (Rx & Tx) into a...

Read more →