Leica Disto X3 Laser Measurer

X3 Laser Measurer Laser Measuring Solution

Leica Disto X3 Video

CONSTRUCTION SITE PROOF

The Leica DISTO^TM  X3 is perfect for tough construction site conditions. It is drop-tested up to 2 m in height, water jet and dust protected to IP 65 standards.

SMART ROOM

New Leica DISTO^TM technologies in combination with the Smart Room function of the Leica DISTO^TM Plan app allow you to quickly create scaled floor plans on your smartphone or tablet.

POINT TO POINT MEASUREMENT

The Leica DST 360 transforms your hand-held laser device into a measurement station. It allows you to measure distances between any two points from one position.

INTUITIVE

Easy to use buttons and functions make working with the DISTO^TM X3 fast and intuitive.

YOUR DISTO X3

The DISTO X3 is designed to make indoor laser measurements an easy task. A holster, hand loop and batteries are included.

Specifications

Download Brochure

Error 156: The transverse tilt is greater than +/- 10°
To resolve: Hold the instrument without any transverse tilt

Error 162: Calibration mistake
To resolve: Make sure the device is placed on an absolutely horizontal and flat surface. Repeat the calibration procedure. If the message still occurs, contact the dealer 

Error 204: Calculation error
To resolve: Repeat measurements, make sure to follow the sequence according to the manual

Error 205: S910 memory full
To resolve: Delete memory

Error 220 & 224: Hardware error
To resolve: If the message continuously appears, contact the dealer for service

Error 240 & 245: Data transfer error
To resolve: Re-connect device with computer and repeat procedure

Error 252: Temperature too high
To resolve: Let device cool down

Error 253: Temperature too low
To resolve: Let device warm up

Error 254: Battery voltage too low for measurements
To resolve: Change batteries

Error 255: Received signal too weak, measuring time too long
To resolve: Change target surface (i.e. white paper)

Error 256: Received signal too high
To resolve: Change target surface (i.e. white paper)

Error 257: Too much background light
To resolve: Shadow target area

Error 258: Measuring outside of measuring range
To resolve: Correct range

Error 260: Laser beam interrupt
To resolve: Repeat measurement

Error 284: Laser defect
To resolve: If message continuously appears, contact the dealer for service

Error 288-294: Hardware error
To resolve: If message continuously appears, contact the dealer for service

Error 300: Smart base not folded out
To resolve: Fold out Smart Base

Error 301: Device was moved, levelling not valid anymore
To resolve: Perform levelling again. Levelling with invalid levelling is possible, but it will affect the accuracy

Error 302: S910 "Point data transmission" is selected, but WLAN is off
To resolve: Switch on WLAN

Error 303 - 306: Error with Leica DST 360 Adapter
To resolve: Repeat procedure and if message still occurs, contact your dealer

Error 340: WLAN: Data transfer error
To resolve: Repeat procedure

Error 341: Authentication error
To resolve: Use correct password

Error >1000: Hardware error
To resolve: If message continuously appears, contact the dealer for service

Error 14041: Smart Base defect
To resolve: If message continuously appears, contact the dealer for service