(item no. 1633984)
Product Overview
This process meter doubles your troubleshooting power and is Fluke Connect-enabled
Ideal troubleshooting tool for electricians and instrumentation professionals, this process meter combines the functionality of a loop calibrator and the power of a digital multimeter. This instrument also comes supplied with the capabilities of Fluke Connect connectivity. Additionally, it comes equipped with a built-in selectable 250 Ω HART® resistor which eliminates the need to carry a separate resistor and large and bright display.
Comes equipped with a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smartphone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.
Features
- 20 mA dc current source/measure/simulate
- Simultaneous mA and % of scale readout
- DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
- Fluke Connect® compatibility for wireless data logging (with IR3000FC module)
- Precision 1000 V, 440 mA True RMS digital multimeter
- Frequency measurement to 20 kHz
- Min/max/average/hold/relative modes
- Diode test and continuity beeper
- Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- Provides 1200 ohm drive capability on mA source
- Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
- Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Large dual display with enhanced two-level backlight brightness settings
Applications
- Electrical and instrumentation
Models: Fluke 789 ProcessMeter™
Includes:
- AC175 Alligator Clips
- Four (4) AA 1.5 V alkaline batteries (installed)
- TL71 safety-designed test lead set
Specifications
| Current Measurement | |
| Range | 0 to 1 A AC or DC |
| Resolution | 1 mA |
| Accuracy | 0.2% + 2 LSD (DC) |
| Range | 0 to 30 mA |
| Resolution | 0.001 mA |
| Accuracy | 0.05% + 2 lSD |
| Current Sourcing | |
| Range | 0 to 20 mA or 4 to 20 mA |
| Resolution | 0.05% of span |
| Drive Capability | 24 V Compliance or 1200 Ω at 20 mA |
| Voltage Measurement | |
| Range | 0 to 1000 V AC (True RMS) or DC |
| Resolution | 0.1 mV to 1.0 V |
| Accuracy | 0.1% Rdg + 1 LSD (VDC) |
| Electrical Specifications | |
| Frequency | To 19.999 kHz, 0.005% + 1 LSD |
| Continuity | Beeps for resistance <100 Ω |
| Resistance Measurement | To 40 MΩ, 0.2% + 1 LSD |
| Diode Test | 2.0 V shoes diode voltage drop |
| Display Current and % of Span | Yes |
| Auto Step, Auto Ramp | Yes |
| Environmental Specifications | |
| Operating Temperature | -4 to 131°F (-20 to 55°C) |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity (Without Condensation) | 95% up to 86°F (30°C) 75% up to 104°F (40°C) 45% up to 122°F (50°C) 35% up to 131°F (55°C) |
| Temperature Coefficient | 0.05 x (specified accuracy) per °C (for temperatures <18°C or >28°C) |
| Safety Specifications | |
| Electrical Safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 |
| Overvoltage Category | IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V |
| Maximum Voltage | 1000 V RMS |
| Mechanical and General Specifications | |
| Batteries | 4 x AA Alkaline batteries |
| Battery Life | 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) |
| Shock and Vibration | Random, 2 g, 5 to 500 Hz 1 m drop test |
| Dimensions | 1.25 x 3.41 x 7.35" (50 x 100 x 203 mm) |
| Weight | 1.6 lbs (610 g) |
Resources: Fluke 789 ProcessMeter™
Manuals
- 789/787B | Users manual
- 789/787B | Users manual supplement
- 787/789 | Statement of memory volatility
- 787B/789 | Statement of memory volatility
- 789/787B | Calibration manual
- 789/787B | Calibration manual supplement
- 789/787B | Quick reference guide
- 789/787B | Safety sheet
Data Sheets
Brochures
Download the App
| Shipping | This Item Ships from Fremantle, Perth, Western Australia |
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Description
(item no. 1633984)
Product Overview
This process meter doubles your troubleshooting power and is Fluke Connect-enabled
Ideal troubleshooting tool for electricians and instrumentation professionals, this process meter combines the functionality of a loop calibrator and the power of a digital multimeter. This instrument also comes supplied with the capabilities of Fluke Connect connectivity. Additionally, it comes equipped with a built-in selectable 250 Ω HART® resistor which eliminates the need to carry a separate resistor and large and bright display.
Comes equipped with a 24-Volt loop supply, which reduces the need to carry a separate power supply when doing offline transmitter testing. You can add an optional temperature measurement module and the wireless data logging capabilities of the Fluke Connect™ mobile app to log data wirelessly to your smartphone and review it from a remote location. So now process technicians can do a lot more while carrying a lot less.
Features
- 20 mA dc current source/measure/simulate
- Simultaneous mA and % of scale readout
- DMM designed to meet 1000 volt IEC 61010 CAT III and 600 V CAT IV standards
- Fluke Connect® compatibility for wireless data logging (with IR3000FC module)
- Precision 1000 V, 440 mA True RMS digital multimeter
- Frequency measurement to 20 kHz
- Min/max/average/hold/relative modes
- Diode test and continuity beeper
- Manual step (100%, 25%, Coarse, Fine) plus Auto Step and Auto Ramp
- Externally accessible battery for easy battery changes
- 24 V Loop power supply
- HART mode setting with loop power (adds 250 ohm resistor)
- Provides 1200 ohm drive capability on mA source
- Delivers 0.1% dc voltage accuracy and 0.05% dc current accuracy
- Includes 0% and 100% buttons to toggle between 4 and 20 mA sourcing for a quick span check
- Large dual display with enhanced two-level backlight brightness settings
Applications
- Electrical and instrumentation
Models: Fluke 789 ProcessMeter™
Includes:
- AC175 Alligator Clips
- Four (4) AA 1.5 V alkaline batteries (installed)
- TL71 safety-designed test lead set
Specifications
| Current Measurement | |
| Range | 0 to 1 A AC or DC |
| Resolution | 1 mA |
| Accuracy | 0.2% + 2 LSD (DC) |
| Range | 0 to 30 mA |
| Resolution | 0.001 mA |
| Accuracy | 0.05% + 2 lSD |
| Current Sourcing | |
| Range | 0 to 20 mA or 4 to 20 mA |
| Resolution | 0.05% of span |
| Drive Capability | 24 V Compliance or 1200 Ω at 20 mA |
| Voltage Measurement | |
| Range | 0 to 1000 V AC (True RMS) or DC |
| Resolution | 0.1 mV to 1.0 V |
| Accuracy | 0.1% Rdg + 1 LSD (VDC) |
| Electrical Specifications | |
| Frequency | To 19.999 kHz, 0.005% + 1 LSD |
| Continuity | Beeps for resistance <100 Ω |
| Resistance Measurement | To 40 MΩ, 0.2% + 1 LSD |
| Diode Test | 2.0 V shoes diode voltage drop |
| Display Current and % of Span | Yes |
| Auto Step, Auto Ramp | Yes |
| Environmental Specifications | |
| Operating Temperature | -4 to 131°F (-20 to 55°C) |
| Storage Temperature | -40 to 140°F (-40 to 60°C) |
| Humidity (Without Condensation) | 95% up to 86°F (30°C) 75% up to 104°F (40°C) 45% up to 122°F (50°C) 35% up to 131°F (55°C) |
| Temperature Coefficient | 0.05 x (specified accuracy) per °C (for temperatures <18°C or >28°C) |
| Safety Specifications | |
| Electrical Safety | Designed in accordance with IEC 1010-1, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No 1010.1-92 |
| Overvoltage Category | IEC 1010-1 CAT III 1000 V IEC 1010-1 CAT IV 600 V |
| Maximum Voltage | 1000 V RMS |
| Mechanical and General Specifications | |
| Batteries | 4 x AA Alkaline batteries |
| Battery Life | 140 hours typical (measurement), 10 hours typical (sourcing 20 mA) |
| Shock and Vibration | Random, 2 g, 5 to 500 Hz 1 m drop test |
| Dimensions | 1.25 x 3.41 x 7.35" (50 x 100 x 203 mm) |
| Weight | 1.6 lbs (610 g) |
Resources: Fluke 789 ProcessMeter™
Manuals
- 789/787B | Users manual
- 789/787B | Users manual supplement
- 787/789 | Statement of memory volatility
- 787B/789 | Statement of memory volatility
- 789/787B | Calibration manual
- 789/787B | Calibration manual supplement
- 789/787B | Quick reference guide
- 789/787B | Safety sheet
Data Sheets
Brochures
Download the App
Shipping
| Shipping | This item ships to |
Delivery & Returns
Please allow 2 - 10 days for your order to arrive.
Although Most Stocked Products will generally Ship Overnight. We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!
Returns are easy.
simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!
Reviews
6 Great reasons to buy from us:
-
30 Days Return
If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. -
Returns are Easy
Simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap! -
Best Price Guarantee
In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down. -
We guarantee your satisfaction
We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again. -
100% Safe & Secure
Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either. -
Best Laser Warranties in the Business
Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.
