WOW0821240209BLCLJLLLML

My Cart
Checkout Secure

Spectra Precision DR400 DIGIROD Laser Detector

Product overview

The Spectra Precision® DR400 DigiRod™ is a versatile, revolutionary tool that eliminates the need for grade rods when checking grades with a rotating laser. The combination of a laser receiver with digital readout, laser distance meter, and built-in tilt sensor provides the information required to take rod-less, accurate grade readings, even at tilt angles up to 30 degrees.

DigiRod Technology

Various grade rods can be emulated including direct elevation rods, cut/fill rods, and indirect reading rods. Units of measure are selectable with the press of a button in meters, decimal feet or fractional inches. This eliminates the need to carry, transport and maintain multiple grade rod types. Elevation measurements can be taken up to 6 meters (20 feet) and the tilt sensor ensures accuracy by automatically correcting to actual vertical distance. The user simply places the laser distance meter spot on the location a grade check is required, picks up the rotating laser beam anywhere on the reception window, and the distance from the ground to the rotating beam is measured and displayed. Errors due to rod math and out of plumb grade rods are virtually eliminated. The rod-less grade checking system also allows for safe trench and excavation grade checking as workers do not have to climb down in the trench or lean over unstable trench edges to obtain elevation readings. Screeded concrete can be checked without leaving marks on the finished surface.

Laserometer Technology

Based upon the popular HL700 Laserometer, the DigiRod functions as a laser receiver and will work with any rotational red beam laser. The receiver has an extra long 127 mm (5 inches) vertical reception range that does not require centering on-grade to obtain a reading. The large LCD screen gives a bright, clear digital readout of elevation that eliminates confusing calculations. An anti-strobe sensor stops construction strobe lights from setting off the receiver. Multiple accuracy setting allows adaptation to meet any job site requirement.

Laser Distance Meter

As a stand-alone laser distance meter, the DigiRod is designed to give contractors a one-person distance measuring and estimating tool to measure remote and difficult-to-reach places such as high overheads, factory interiors, or over water. It can measure up to 50 meters (160 feet) and has an accuracy of ±2.0 mm (±1/16 inch). A continuous measure mode is useful for staking out various distances and a minimum/maximum function accurately measures diagonals and right angles to surfaces.
The versatility, portability, and functionality of the DR400 DigiRod will add value outside of the traditional construction markets and could include applications in surveying.

 

The DR400 is a combination Laserometer (HL700) with a built-in electronic laser grade rod.

The DR400 combines both functions (receiver and rod) in a handheld receiver sized package.

The DR400 incorporates Trimble HL700 Supercell technology, laser distance measuring technology and angle sensing components to achieve these goals.

 

FEATURES

 

As Digirod Laserometer

  • Extremely portable, universal system that eliminates the need to carry, transport, or maintain multiple grade rod types
  • Increases safety, reducing the need to lean over or go into excavations or trenches
  • Increases accuracy, the internal angle compensation system reduces errors and extra material costs due to tilted grade rods
  • Increases productivity by always having the correct rod on-hand, and eliminating tool marks on the screeded concrete
  • Easy to learn, easy to use - the simple graphical display and bright backlight allow for fast readings in low light
  • Works with existing rotating lasers, increasing productivity with a fast payback
  • Built-in angle sensing and COMPENSATION up to 30°
  • Works with red beam lasers as well
  • Radio built into a detector
  • Reception Height 5.0 inches (127 mm)
  • Operating Range (radius) 825 ft (250 m)


    As a Rod Mounted Digital Laserometer

    • Digital Readout of Elevation allows faster readings by displaying the exact numerical distance from grade, eliminating the need to move the receiver to get to “on-grade”.
    • Anti-Strobe Sensor stops construction strobe lights from setting off the receiver and eliminates phantom strikes for easier identification of true laser beam signals.
    • Large 12.7 cm (5 inches) reception height allows faster readings by acquiring the beam quickly and makes it easier to stay in the beam.
    • Universal Reversible Clamp for square or oval rods
    • Simultaneous elevation LEDs and bright backlight reinforces the elevation display in low light for faster readings


    As Handheld Laser Distance Meter

    • Increases productivity by one tool having multiple applications
    • Increases safety by allowing one person to make accurate readings in difficult-to-reach areas
    • Increases accuracy, eliminating issues with sagging or mis-held tapes at different temperatures

     

    Includes:

    • DR400
    • C70 Rod Clamp
    • Holster with belt clip
    • Laser glasses
    • Multi-language manual

     

    Specifications

    DR400 Specification
    General 
    Back-light Yes
    Anti-Strobe Sensor Yes
    LED's HI: Red, On-Grade: Green, Low: Blue
    Audible Tones Loud, Medium, Low, Off
    Reception Height

    12.7mm (5 Inches)

    Dust and Waterproof IP67
    Warranty 5 Years, 3 Years, No Cost
    DigiRod up to 80m (260ft)
    Laser Beam AUTO, 1.8" (3mm)
    Accuracy Settings AUTO 1/8" (3mm), 1/2" (10mm)
    Tilt Angle Compensation AUTO ±30° - Shot Confidence Reported, 3mm (1/8)" ±5°, 10mm (1/2)" ±10°
    Emulated Rod Types Direct Reading, Indirect Reading, Cut/Fill 6m (20ft) Rod Length 
    Emulated Rod Units Meters, Feet-Tenths (decimal feet), Feet-Inches 1/8 or 1/16 
    Battery Life (NiMH/alkaline) 1,500b Shots Typical
    Laserometer
    Working Radius 1 - 300m (3-1,000ft)
    Detectable Spectrum 610 - 780 mm
    Capture Mode Yes
    Special Functions (via Menu) Yes
    Laser Distance Meter
    Measurement Range 0.3 - 50m (1-160ft)
    Measurement Accuracy ±2mm (±1/16")
    Continuous Min/Max Mode Yes

     Download Brochure

    Shipping
    This Item Ships from Fremantle, Perth, Western Australia   

          

    Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

    Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

     

     

    Here are 6 more great reasons to buy from us:

          

    You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

    Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

    In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

    We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

    Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
    Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

     

     

    Spectra Precision DR400 DIGIROD Laser Detector

    Product overview

    The Spectra Precision® DR400 DigiRod™ is a versatile, revolutionary tool that eliminates the need for grade rods when checking grades with a rotating laser. The combination of a laser receiver with digital readout, laser distance meter, and built-in tilt sensor provides the information required to take rod-less, accurate grade readings, even at tilt angles up to 30 degrees.

    DigiRod Technology

    Various grade rods can be emulated including direct elevation rods, cut/fill rods, and indirect reading rods. Units of measure are selectable with the press of a button in meters, decimal feet or fractional inches. This eliminates the need to carry, transport and maintain multiple grade rod types. Elevation measurements can be taken up to 6 meters (20 feet) and the tilt sensor ensures accuracy by automatically correcting to actual vertical distance. The user simply places the laser distance meter spot on the location a grade check is required, picks up the rotating laser beam anywhere on the reception window, and the distance from the ground to the rotating beam is measured and displayed. Errors due to rod math and out of plumb grade rods are virtually eliminated. The rod-less grade checking system also allows for safe trench and excavation grade checking as workers do not have to climb down in the trench or lean over unstable trench edges to obtain elevation readings. Screeded concrete can be checked without leaving marks on the finished surface.

    Laserometer Technology

    Based upon the popular HL700 Laserometer, the DigiRod functions as a laser receiver and will work with any rotational red beam laser. The receiver has an extra long 127 mm (5 inches) vertical reception range that does not require centering on-grade to obtain a reading. The large LCD screen gives a bright, clear digital readout of elevation that eliminates confusing calculations. An anti-strobe sensor stops construction strobe lights from setting off the receiver. Multiple accuracy setting allows adaptation to meet any job site requirement.

    Laser Distance Meter

    As a stand-alone laser distance meter, the DigiRod is designed to give contractors a one-person distance measuring and estimating tool to measure remote and difficult-to-reach places such as high overheads, factory interiors, or over water. It can measure up to 50 meters (160 feet) and has an accuracy of ±2.0 mm (±1/16 inch). A continuous measure mode is useful for staking out various distances and a minimum/maximum function accurately measures diagonals and right angles to surfaces.
    The versatility, portability, and functionality of the DR400 DigiRod will add value outside of the traditional construction markets and could include applications in surveying.

     

    The DR400 is a combination Laserometer (HL700) with a built-in electronic laser grade rod.

    The DR400 combines both functions (receiver and rod) in a handheld receiver sized package.

    The DR400 incorporates Trimble HL700 Supercell technology, laser distance measuring technology and angle sensing components to achieve these goals.

     

    FEATURES

     

    As Digirod Laserometer

    • Extremely portable, universal system that eliminates the need to carry, transport, or maintain multiple grade rod types
    • Increases safety, reducing the need to lean over or go into excavations or trenches
    • Increases accuracy, the internal angle compensation system reduces errors and extra material costs due to tilted grade rods
    • Increases productivity by always having the correct rod on-hand, and eliminating tool marks on the screeded concrete
    • Easy to learn, easy to use - the simple graphical display and bright backlight allow for fast readings in low light
    • Works with existing rotating lasers, increasing productivity with a fast payback
    • Built-in angle sensing and COMPENSATION up to 30°
    • Works with red beam lasers as well
    • Radio built into a detector
    • Reception Height 5.0 inches (127 mm)
    • Operating Range (radius) 825 ft (250 m)


      As a Rod Mounted Digital Laserometer

      • Digital Readout of Elevation allows faster readings by displaying the exact numerical distance from grade, eliminating the need to move the receiver to get to “on-grade”.
      • Anti-Strobe Sensor stops construction strobe lights from setting off the receiver and eliminates phantom strikes for easier identification of true laser beam signals.
      • Large 12.7 cm (5 inches) reception height allows faster readings by acquiring the beam quickly and makes it easier to stay in the beam.
      • Universal Reversible Clamp for square or oval rods
      • Simultaneous elevation LEDs and bright backlight reinforces the elevation display in low light for faster readings


      As Handheld Laser Distance Meter

      • Increases productivity by one tool having multiple applications
      • Increases safety by allowing one person to make accurate readings in difficult-to-reach areas
      • Increases accuracy, eliminating issues with sagging or mis-held tapes at different temperatures

       

      Includes:

      • DR400
      • C70 Rod Clamp
      • Holster with belt clip
      • Laser glasses
      • Multi-language manual

       

      Specifications

      DR400 Specification
      General 
      Back-light Yes
      Anti-Strobe Sensor Yes
      LED's HI: Red, On-Grade: Green, Low: Blue
      Audible Tones Loud, Medium, Low, Off
      Reception Height

      12.7mm (5 Inches)

      Dust and Waterproof IP67
      Warranty 5 Years, 3 Years, No Cost
      DigiRod up to 80m (260ft)
      Laser Beam AUTO, 1.8" (3mm)
      Accuracy Settings AUTO 1/8" (3mm), 1/2" (10mm)
      Tilt Angle Compensation AUTO ±30° - Shot Confidence Reported, 3mm (1/8)" ±5°, 10mm (1/2)" ±10°
      Emulated Rod Types Direct Reading, Indirect Reading, Cut/Fill 6m (20ft) Rod Length 
      Emulated Rod Units Meters, Feet-Tenths (decimal feet), Feet-Inches 1/8 or 1/16 
      Battery Life (NiMH/alkaline) 1,500b Shots Typical
      Laserometer
      Working Radius 1 - 300m (3-1,000ft)
      Detectable Spectrum 610 - 780 mm
      Capture Mode Yes
      Special Functions (via Menu) Yes
      Laser Distance Meter
      Measurement Range 0.3 - 50m (1-160ft)
      Measurement Accuracy ±2mm (±1/16")
      Continuous Min/Max Mode Yes

       Download Brochure

      Shipping
      This Item Ships from Fremantle, Perth, Western Australia   

            

      Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

      Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

       

       

      Here are 6 more great reasons to buy from us:

            

      You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

      Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

      In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

      We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

      Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
      Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

       

       

      Added to cart!