WOW0821240209BLCLJLLLML

My Cart
Checkout Secure

OVERVIEW

The SuperCAT4+ range of locators and transmitters uses a selection of passive, sonde and active frequencies designed to target specific buried assets. Using Radiodetection’s familiar C.A.T controls and display, minimal retraining is required to access these advanced capabilities.

For oil and gas pipes using a Cathodic Protection System, the CPS model can locate the rectified signal without needing an additional transmitter.

The S model locates a range of sonde frequencies that can be matched to the challenges of finding water and drain pipes. A lower frequency sonde is useful to trace deep cast-iron pipes. Higher frequency sondes can be easier to distinguish in an electronically noisy urban environment.

SuperCAT4+ can be used to locate a comprehensive set of active frequencies to support the detection and tracing of different cable types in varied environmental conditions. Higher frequencies such as the 131kHz or 65kHz can be used to find well-insulated utilities such as twisted-pair telecom cables or insulated pipe joints. For long-range locating of lower resistance cables, such as power lines, lower frequency options are available.

 

FEATURES

Safety Built-In

All SuperCAT4+ models come with a range of features designed to aid safe working practices.

Dynamic Overload Protection

High levels of electrical interference, as found around substations and near high-voltage transmission cables can overload sensitive electronics. Dynamic Overload Protection filters this interference out, enabling SuperCAT4+ to continue locating where other units struggle.

Dig more safely with StrikeAlert™

StrikeAlert warns the user to the possible presence of shallow cables and utility lines in both Power and Active Line modes.

Although work practices and guidelines insist power cables are buried below a certain depth, a common cause of cable strikes is unexpectedly shallow cables.

TRUDEPTH™

Indicates depth when the locator is oriented correctly above the target cable, pipe or sonde for the most accurate reading.

Real Sound

The audio signals emitted by the SuperCAT4+ are derived from the signals detected. Radio, Power and Active signals can be easily distinguished from each other, and from background noise, helping identification of target utilities, and aiding differentiation of closely co-located utilities.

 

APPLICATIONS

Signal Clamping

Safely apply a T1 signal to a pipe or live cable up to 125mm/5” diameter without interrupting the supply.

 

Direct Connection

The most effective method for connecting to a valve, meter, junction box or other access points, as long as access is possible.

 

Induction

Conveniently apply a transmitter signal to a pipe or cable when a direct connection or signal clamping is not possible.

     

    SPECIFICATIONS

    StrikeAlert
    Depth readout*
    Dynamic Overload Protection
    Passive modes
    Radio mode
    Power mode 50Hz /60Hz**
    Sondes
    Sonde 512/640Hz**
    Sonde 33kHz

    Download Brochure

    Shipping
    This Item Ships from Fremantle, Perth, Western Australia   

          

    Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

    Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

     

     

    Here are 6 more great reasons to buy from us:

          

    You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

    Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

    In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

    We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

    Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
    Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

     

     

    OVERVIEW

    The SuperCAT4+ range of locators and transmitters uses a selection of passive, sonde and active frequencies designed to target specific buried assets. Using Radiodetection’s familiar C.A.T controls and display, minimal retraining is required to access these advanced capabilities.

    For oil and gas pipes using a Cathodic Protection System, the CPS model can locate the rectified signal without needing an additional transmitter.

    The S model locates a range of sonde frequencies that can be matched to the challenges of finding water and drain pipes. A lower frequency sonde is useful to trace deep cast-iron pipes. Higher frequency sondes can be easier to distinguish in an electronically noisy urban environment.

    SuperCAT4+ can be used to locate a comprehensive set of active frequencies to support the detection and tracing of different cable types in varied environmental conditions. Higher frequencies such as the 131kHz or 65kHz can be used to find well-insulated utilities such as twisted-pair telecom cables or insulated pipe joints. For long-range locating of lower resistance cables, such as power lines, lower frequency options are available.

     

    FEATURES

    Safety Built-In

    All SuperCAT4+ models come with a range of features designed to aid safe working practices.

    Dynamic Overload Protection

    High levels of electrical interference, as found around substations and near high-voltage transmission cables can overload sensitive electronics. Dynamic Overload Protection filters this interference out, enabling SuperCAT4+ to continue locating where other units struggle.

    Dig more safely with StrikeAlert™

    StrikeAlert warns the user to the possible presence of shallow cables and utility lines in both Power and Active Line modes.

    Although work practices and guidelines insist power cables are buried below a certain depth, a common cause of cable strikes is unexpectedly shallow cables.

    TRUDEPTH™

    Indicates depth when the locator is oriented correctly above the target cable, pipe or sonde for the most accurate reading.

    Real Sound

    The audio signals emitted by the SuperCAT4+ are derived from the signals detected. Radio, Power and Active signals can be easily distinguished from each other, and from background noise, helping identification of target utilities, and aiding differentiation of closely co-located utilities.

     

    APPLICATIONS

    Signal Clamping

    Safely apply a T1 signal to a pipe or live cable up to 125mm/5” diameter without interrupting the supply.

     

    Direct Connection

    The most effective method for connecting to a valve, meter, junction box or other access points, as long as access is possible.

     

    Induction

    Conveniently apply a transmitter signal to a pipe or cable when a direct connection or signal clamping is not possible.

       

      SPECIFICATIONS

      StrikeAlert
      Depth readout*
      Dynamic Overload Protection
      Passive modes
      Radio mode
      Power mode 50Hz /60Hz**
      Sondes
      Sonde 512/640Hz**
      Sonde 33kHz

      Download Brochure

      Shipping
      This Item Ships from Fremantle, Perth, Western Australia   

            

      Please allow 2 - 10 days for your order to arrive. Although Most Stocked Products will generally Ship Overnight.  We source products from all over the world to bring you epic offers and the lowest prices. This means sometimes you have to wait a little longer to get your order but it's always worth it!

      Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

       

       

      Here are 6 more great reasons to buy from us:

            

      You get a full 30 days to return your item to us. If your product is faulty or damaged under manufacture warranty, simply send it back to us and we'll cheerfully replace it or fix the problem for you. 

      Returns are easy, simply contact us for a returns number and send your item to our returns centre for fast processing. We'll get you a replacement or refund in a snap!

      In the unlikely event that you find your item cheaper at another online store, just let us know and we'll beat the competitor's pricing hands-down.

      We insist that you love everything you buy from us. If you're unhappy for any reason whatsoever, just let us know and we'll bend over backwards to make things right again.

      Ordering from Laserman Technologies is 100% safe and secure so you can rest easy. Your personal details are never shared, sold or rented to anyone either.
      Laserman the Best Laser Level, Pipe Laser and Laser Measuring Warranties in the Business - Now thats unbeatable value !!.

       

       

      Added to cart!